太原伯爵表专修/伯爵-PIAGET(中国)授权保养服务点名表维修连锁电话：400-875-1181/400-677-0155全国百家连锁维修领导品牌，太原伯爵表专修/伯爵-PIAGET(中国)授权保养服务点 服务地区：北京、上海、天津、广州、深圳、杭州、南京、沈阳、太原、成都、武汉、南昌、西安、南宁、郑州、昆明、苏州 等地区，形成了庞大的腕表售后维修服务网络，为广大消费者提供方便、快捷的手表维修服务，太原伯爵表专修/伯爵-PIAGET(中国)授权保养服务点 专业的维修技术、透明 的维修价格、立等可取的维修效率网上电话预约可享受9折优惠，太原伯爵表专修/伯爵-PIAGET(中国)授权保养服务点 到店修表立等可取，流程透明，价格公开。

---

---

　　华东地区维修服务热线：4006807911

　　济南(山东店)：济南市历下区泉城路180号齐鲁大厦B座10层1005室

　　南京(江苏店)：南京市秦淮区汉中路1号南京金融中心10楼H室

　　合肥(安徽店): 合肥市蜀山区长江西路189号合肥之心城环球中心A座20层09室

　　杭州(杭州店)：杭州市下城区环城北路208号杭州大厦C座坤和中心30层06室

　　上海(上海店)：上海市黄浦区南京东路409-459号上海置地广场9楼918室

　　华南地区维修服务热线：4008092655

　　广州(广州店)：广州市天河区体育西路103号维多利广场写字楼A座2605室

　　深圳(深圳店)：深圳市罗湖区深南东路5002号地王大厦写字楼25层2510室

　　南宁(广西店)：南宁市青秀区金湖北路59号地王大厦12楼

　　华中地区维修服务热线：4006807911

　　武汉(湖北店)：武汉市汉江区中山大道818号平安大厦22层11室

　　郑州(河南店)：郑州市金水区花园路39号国贸中心招银大厦14层1406室

　　南昌(江西店)：南昌市东湖区胜利路步行街32号裕泰福珠宝二层

　　华北地区维修服务热线：4008092655

　　北京(北京店)：北京市西城区西单北大街甲131号西单大悦城写字楼7楼702室

　　天津(天津店)：天津市和平区南京路219号天津中心写字楼9楼903室

　　太原(山西店)：山西省太原市迎泽区解放路3号亨得利钟表眼镜店三层

　　西南地区维修服务热线：4008751181

　　成都(四川店)：成都市锦江区东御街18号天府广场百扬大厦21层2107室

　　东北地区维修服务热线：4006770155

　　沈阳(辽宁店)：沈阳市和平区中华路69-1号富丽华商务中心9楼903室

　　哈尔滨(黑龙江店)：哈尔滨市南岗区东大直街146号上和置地广场金座12楼1214室

【太原伯爵表专修/伯爵-PIAGET(中国)授权保养服务点】

　　每一款手表都有自己的保养方法，唯有正确的使用了日常的保养方法，那么才能够说使用的寿命越来越长，今天小编给你介绍如何正确保养玛莎拉蒂手表的小贴示，一起来学习一下吧。

　　1、在汽油中浸泡后并洗涤即在汽油中浸泡后并洗涤即可解决油垢长期积蓄阻塞手表故障，达到保养手表目的。

　　2、检查手表内部零件，如发现螺钉帽断落的情形，即用表螺钉起子将其旋出。然后取出断折螺钉，即可达到处理手表内部零件故障问题，以达到保养手表的目的。

each watch with their maintenance, only the correct use of the daily maintenance method, then to be able to say more ａnd more long use life, today Xiaobian to introduce you how to properly maintain the Martha Lahti watch tips, together to learn.

In 1,

in gasoline soaked ａnd washed or soaked in gasoline after washing ａnd grease can solve the long-term savings blocking watches failure, achieve the maintenance to watch.

2, check the internal parts of the watch, such as the discovery of screw cap off the case, namely the spin out meter screw driver. Then remove the broken screw, can achieve the processing problem of the internal parts of the watch, in order to achieve the purpose of maintaining watch.

　　3、清洁手表油污。条轴转动不灵活，油垢长期积蓄阻塞是造成手表故障因素，梗阻严重实为箍固，这时硬上条则势必造成折齿，故宜在汽油中浸泡后 并洗涤即可解决。条轴在条盒轮与条盒盖间无轴向或径向间隙是转动不灵的又一因素，应参照条盒轮的整修办法进行。

　　4、清除手表断落螺钉帽，长期不处理将会影响手表的性能。手表大钢轮螺钉折断千条轴内，大钢轮螺钉绝大多数采用正旋螺钉，国外机械手表有少数使用反旋螺钉，未搞清它的旋向而过猛用力往往会发生螺钉帽断落的情形，大钢轮失去螺钉的紧固，在手表上条时就会从条轴方神段脱出，而不能带动条轴上紧发条。残存于条轴内的螺钉，其长度若露出条轴时，可用夹钳咬住断折的螺丝，按旋出方向把它旋出，断折的螺钉与 条轴方桦顶相平时，可利用车刀尖分别要住断折螺钉边缘几处把它契旋松。断折的手表螺钉稍低于条轴方桦顶面时，也可用薄锉刀(俗称钉子锉)在条 轴方禅顶面先锉一个凹槽，相应残留螺钉也开了起子槽，然后用表螺钉起子将其旋出，然后取出断折螺钉，即可达到处理手表内部零件故障问题，以增加手表工作寿命。

3, clean watch oil. The axis of rotation is not flexible, the grease blocking is caused by one of the long-term savings watch fault factors, serious obstruction is a hard solid band, this will cause the teeth, so it should be solved ａnd can be soaked in gasoline after washing. A shaft in the box ａnd a box cover wheel without axial or radial clearance is another factor to move, should refer to a box of round renovation measures.

4, remove the watch off the screw cap, long-term treatment will affect the performance of the watch. Watch the big steel wheel screw break 1000 shaft, ratchet wheel screw is the most screw, a few foreign mechanical watches use anti rotation screw, did not understand its rotation direction ａnd excessive force often occur in the breaking of the screws, fastening screws of the steel wheel lose, in the hand on the table when the axis side will be from the God of prolapse, ａnd can not bring the axis wind. Screw axis remains in the length of the shaft if exposed, can bite broken clamp screws, screw out according to the direction of the spin it out, broken screw ａnd shaft side top phase usually can use birch, tool tip respectively to live a few broken screw edge it. Unscrew. The watch is slightly lower than the broken screw shaft side of the top surface of birch, also available thin file (commonly known as nail file) on a top surface of the first shaft Zen file a groove, the corresponding residual screws also opened the driver slot, then screw out the screw driver table, ａnd then remove the broken screw, can achieve the processing the internal parts of the watch problem, in order to increase the working life of the watch.