北京格拉苏蒂手表售后/Glashutte(中国)授权售后维修中心名表维修连锁电话：400-875-1181/400-677-0155全国百家连锁维修领导品牌，北京格拉苏蒂手表售后/Glashutte(中国)授权售后维修中心 服务地区：北京、上海、天津、广州、深圳、杭州、南京、沈阳、太原、成都、武汉、南昌、西安、南宁、郑州、昆明、苏州 等地区，形成了庞大的腕表售后维修服务网络，为广大消费者提供方便、快捷的手表维修服务，北京格拉苏蒂手表售后/Glashutte(中国)授权售后维修中心 专业的维修技术、透明 的维修价格、立等可取的维修效率网上电话预约可享受9折优惠，北京格拉苏蒂手表售后/Glashutte(中国)授权售后维修中心 到店修表立等可取，流程透明，价格公开。

---

---

　　华东地区维修服务热线：4006807911

　　济南(山东店)：济南市历下区泉城路180号齐鲁大厦B座10层1005室

　　南京(江苏店)：南京市秦淮区汉中路1号南京金融中心10楼H室

　　合肥(安徽店): 合肥市蜀山区长江西路189号合肥之心城环球中心A座20层09室

　　杭州(杭州店)：杭州市下城区环城北路208号杭州大厦C座坤和中心30层06室

　　上海(上海店)：上海市黄浦区南京东路409-459号上海置地广场9楼918室

　　华南地区维修服务热线：4008092655

　　广州(广州店)：广州市天河区体育西路103号维多利广场写字楼A座2605室

　　深圳(深圳店)：深圳市罗湖区深南东路5002号地王大厦写字楼25层2510室

　　南宁(广西店)：南宁市青秀区金湖北路59号地王大厦12楼

　　华中地区维修服务热线：4006807911

　　武汉(湖北店)：武汉市汉江区中山大道818号平安大厦22层11室

　　郑州(河南店)：郑州市金水区花园路39号国贸中心招银大厦14层1406室

　　南昌(江西店)：南昌市东湖区胜利路步行街32号裕泰福珠宝二层

　　华北地区维修服务热线：4008092655

　　北京(北京店)：北京市西城区西单北大街甲131号西单大悦城写字楼7楼702室

　　天津(天津店)：天津市和平区南京路219号天津中心写字楼9楼903室

　　太原(山西店)：山西省太原市迎泽区解放路3号亨得利钟表眼镜店三层

　　西南地区维修服务热线：4008751181

　　成都(四川店)：成都市锦江区东御街18号天府广场百扬大厦21层2107室

　　东北地区维修服务热线：4006770155

　　沈阳(辽宁店)：沈阳市和平区中华路69-1号富丽华商务中心9楼903室

　　哈尔滨(黑龙江店)：哈尔滨市南岗区东大直街146号上和置地广场金座12楼1214室

【北京格拉苏蒂手表售后/Glashutte(中国)授权售后维修中心】

　　人们在夏季常常较多运动、大汗淋漓，由于汗水中的酸碱值不同，腕表的材质也不同，汗水和撞击对表侵蚀的程度也不尽相同。所以夏季对腕表的保养显得更为重要。不同材质的腕表，保养方面也有着不一样的重点。作为爱表人士的你一定要知道以下几点保养知识。

people in the summer often more exercise, sweating, sweat due to the pH value in different materials, the watch is different, ａnd the impact on the sweat erosion degree is not the same. So the maintenance of the watch is more important in summer. Different materials of the watch, maintenance also has a different emphasis. As a person of love, you must know the following maintenance knowledge.

　　珠宝表

　　珠宝表不仅是计时工具，更是亮丽的首饰，因此它更需要细心的呵护，才可常保闪耀如新。

　　在夏季的时候由于衣着少、易碰撞，很容易造成宝石的松动甚至脱落。

　　保养重点：

　　1.珠宝表*怕撞击，夏季运动时应尽量将表取下。

　　2.宝石要避免被腐蚀和硬物摩擦，喷香水或者做粗活的时候应将表取下，以免宝石被腐蚀或磨损。

　　3.每次佩戴前需要检查宝石是否有松动，如有需要立即送往表店修理。

　　机械表

　　机械腕表机芯在潮湿空气中或受腐蚀性气体的侵蚀会出现锈蚀现象， 若长期被汗水侵蚀或听任酸碱盐污物积聚而不擦去，腕表就会慢慢出现锈斑，尤其是后盖低凹处容易出现。 特别是在多雨的夏天*易造成修配件的生锈而损坏。

　　保养重点：

　　1、硅胶干燥器，根据修理单位的规模和需要，应备有一个或几个千燥器，以存机械腕表机芯，避免机芯零件受潮后生锈。

　　2、快速去锈液来去锈。775毫升上述溶液按比例混合后，即可将机械手表机芯部件放入其中很快能除锈。具体浸泡时间视零件生锈程度而定。

　　高硬度材质

　　碳化钨硬质合金、高科技陶瓷、蓝宝石玻璃等材质的特点是硬度高、耐磨性强，此材质的腕表经长期佩戴后外观仍可保持光洁如新。但日夏季常常户外运动，如不慎碰撞，会发生划伤外观表面的现象。

　　保养重点：

　　1.夏季在打球等运动前，应该取下手表。这些高硬度材质的抗弯强度和冲击韧性不如不锈钢。因此应尽量避免敲击、撞击或坠落在坚硬地面上。

　　2.平时可用牙刷沾少许沙拉脱轻刷手表，将污渍去除。

　　镀层/K金材质

　　镀层和K金化学稳定性好、耐磨，但是白色的K金、玫瑰金经过长时间的佩戴，尤其是在多汗的夏季很可能出现轻微的变色，这是因为人体汗液中有少量的氯化物、乳酸、尿素氨等，这些物质与K金接触后可能会发生化学反应，产生微量深黑色的化学盐。

　　保养重点：

　　1.K金材质主要是需要避免夏季汗水的腐蚀，应该定期用湿棉部轻轻擦拭，以去除汗渍和灰尘。

　　2.擦洗或者清洗後可用吹风机将表吹乾。

　　以上所谈的主要是腕表的外壳及链带的保养，至于表内部保养洗油和彻底的清洁，仍应该定期送到表店做专业处理。

jewelry table

jewelry table is not only a timing tool, it is more beautiful jewelry, so it needs more careful care, can often shine as new.

in the summer due to less clothing, easy to crash, it is easy to loose the gem ａnd even fall off.

maintenance focus:

1 jewelry table most afraid of impact, the summer movement should be as far as possible to take off the table.

2 gems to avoid corrosion ａnd hard friction, perfume or to do menial work time should be taken to avoid the stone table, corrosion or wear.

3 each wear before the need to check whether the gem is loose, such as there is a need to immediately rushed to the shop repair shop.

mechanical table

The erosion of

mechanical watch movement in the moist air or corrosive gases will be corroded, if the long-term erosion by sweat or allow alkali salt buildup dirt ａnd does not wipe, the watch will slowly appear rust, especially prone to cover the concave. Especially in the rainy summer, the most likely to cause repair parts rust ａnd damage.

maintenance focus:

1, silica gel dryer, according to repair unit size ａnd needs, there should be one or several thousand dryer, to keep the mechanical watch movement, avoid the machine parts with rust.

2, fast to rust liquid to come ａnd go rust. 775 milliliters of the solution can be mixed in proportion, mechanical watch movement parts into which can quickly rust. The specific immersion time depending on the degree of rust parts.

high hardness material

The characteristics of

tungsten carbide hard alloy, high-tech ceramics, sapphire glass material is of high hardness, wear resistance, the material of the watch after long-term wear appearance can keep clean. But on the day of summer, often outdoor sports, such as careless collision, will happen to scratch the appearance of the appearance of the phenomenon.

maintenance focus:

1 in the summer before playing ａnd other sports, should take down the watch. The bending strength ａnd impact toughness of these high hardness materials are not as high as those of stainless steel. So try to avoid hitting, hitting, or falling on the hard ground.

2 usually can use a small brush dipped in a toothbrush to gently brush watch, remove stains.

/

gold coating material

gold plating ａnd good chemical stability, abrasion resistance, but the white gold, rose gold after a long time to wear, especially a slight discoloration is likely in the sweaty summer, this is because there is a small amount of chloride, lactic acid, urea ａnd ammonia in human sweat, these substances with K gold contact may occur after chemical to produce a chemical reaction, deep black trace salt.

maintenance focus:

1 carat gold is the main material to avoid corrosion of summer sweat, should be the best department regularly with wet cotton gently wipe, to remove dust ａnd sweat.

2 after washing or washing hair dryer can be used to blow dry.

of the main case ａnd bracelet watch the maintenance, maintenance ａnd cleaning for internal cleaning, should be regularly sent to do the professional processing shop table.