请登录 免费注册

热搜:通用机械五金工具仪器仪表安防监控

频道
通用机械 电子元器件 行业设备 五金工具 电工电气 仪器仪表 安防监控 专用汽车 照明灯具 化工原料 涂料 塑胶 建筑原料 皮革 冶金
推荐阅读

您的位置:首页 > 技术文献 > 技术交流 > 气密性试验仪试验步骤

标题气密性试验仪试验步骤

   

提供者:献县鹏翼建筑仪器厂    发布时间:2021/12/21   阅读次数:294次 >>进入该公司展台
气密性试验仪试验步骤

充气检查方法是将5号注射针与压力表相连接,用打气筒进行充气,当压力表达到0.25MPa时停止充气,保持15min,压力下降在10%以内,说明焊接缝合格。如压力下降过快说明有渗漏,用肥皂水涂在焊缝上,有气泡的地方重新补焊。

产品本厂承诺所有的系列产品,严格按照国标、部标标准组织生产,并承诺所提供的产品是全新的未曾使用过的,从原材料进厂到设备出厂都经过严格的和完善的检验。

Our factory promises that all series of products will be produced in strict accordance with the National Standard and the ministry standard, and that the products will be brand-new and unused, from the raw materials into the factory to the equipment factory after strict and perfect inspection.

二、售后服务

产品售后服务工作由本厂售后服务部与全国的授权代理商和经销商共同完成。

The after-sales service of the after-sales service products shall be jointly completed by the after-sales Service Department of our factory and authorized agents and distributors throughout the country.

 

三、免费质保期内提供24小时电话技术支持与4小时响应服务,24小时内解决问题,24小时内仍无法解决问题的按原型号及材质进行更换。

Free Warranty period to provide 24-hour telephone technical support and 4-hour Response Service, 24 hours to solve the problem, 24 hours can not solve the problem by the original model and material replacement.

气密性试验仪试验步骤

关键词:气密性试验仪试验步骤  气密性试验仪  

版权声明

凡本网注明"来源:易推广"的所有作品,版权均属于易推广,未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品,应在授权范围内

使用,并注明"来源:易推广"。违者本网将追究相关法律责任。

本信息由注册会员:献县鹏翼建筑仪器厂 发布并且负责版权等法律责任。

最新产品 - 今日最热门报道-分类浏览 - 每日产品
  • 易推广客服微信